A grease nipple is a metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, under moderate to high pressure, into a bearing using a grease gun.
The fitting is permanently installed by a threaded connection, leaving a nipple connection that the grease gun attaches to.
Our range of hydraulic Grease nipples are manufactured to international standards and supplied across a wide range of thread types, styles and materials. Depending on the application and the installation sites, we can supply grease nipples according to international standards. Other than a standard version made of steel, zinc-plated and passivated, we offer many other types, made of brass or stainless steel. You will always find a solution in our range of products – even for the most challenging application.
All Eastern Seals (UK) Ltd Grease nipples meet the below specifications:
In Seal Quench Furnaces Eliminates Scaling Ensures perfect control of Case Depth.
Controlled to a minimum of 83 on rockwell 15N scale.
3. CASE DEPTH
0.005”-0.009”(0.13mm – 0.23mm).
Grease Fittings are tested with 6.6 lbs load dropped at 90° to the fittings center line, to ensure proper heat treatment and resistance of the fitting to impact.
5. CONCENTRICITY OF BALL
Within 0.00004” (1 micron).
Exceeds ASTM B117 standards. Salt spray life of 75 hrs to red rust Plating thickness within (5 microns)
*Trivalent plating (Cr 6+ free & RoHS Compliant).
Special grade 3 German Music Wire ensures accurate.
Controlled within +/- 0.001” (25 microns)
(12 times tighter than SAEJ534 tolerance).
Super strong rolled threads.
Formed in turning perfect concentricity with threads.
Grease nipples information
To find out more information on our products, please visit our Downloads section.
Contact us to discuss your application or check stock availability.