View CartHNBR 70 O-rings
Showing all 5 results
-
HNBR70 O-Rings BS001 to BS050 Cross Section 1.02mm to 1.78mm
£0.10 – £0.66 -
HNBR70 O-Rings BS102 to BS178 Cross Section 2.62mm
£0.11 – £2.12 -
HNBR70 O-Rings BS201 to BS284 Cross Section 3.53mm
£0.11 – £4.73 -
HNBR70 O-Rings BS309 to BS395 Cross Section 5.33mm
£0.24 – £17.32 -
HNBR70 O-rings BS425 to BS475 Cross Section 6.99mm
£2.84 – £24.12
HNBR 70 O-Rings (Hydrogenated Nitrile Rubber seals)
HNBR 70 O-rings are produced from the hydrogenation of Nitrile, resulting in varying degrees of saturation of the polymeric chain, along with a range of enhanced physical strength and chemical resistance properties.
HNBR 70 O-Rings, also known as Highly Saturated Nitrile (HSN), is a synthetic polymer produced from the hydrogenation of Nitrile, resulting in varying degrees of saturation of the polymeric chain, along with a range of enhanced physical strength and chemical resistance properties.
HNBR O-Rings are ideal for mechanically demanding applications. Heat and Chemical resistant. Available in BS / Metric sizes.
Key Uses
HNBR o-rings are ideal for all oil resistant applications, including exposure to such oil additives as detergents, anti-oxidants and anti-wear agents.
• Exposure to oil soured with metal sludge.
• Seals for oil well applications.
• Seals for automotive fuel handling systems.
• Seals for general industrial usage.
| Colour | Black |
|---|---|
| Material | HNBR (Hydrogenated Nitrile) |
| O-ring type | British Standard (imperial) |
| Hardness (Shore A) | 70 |
| Maximum Temperature (°C) | +150°C (-175°C special compounds) |
| Minimum Temperature (°C) | -40°C (-60°C special compounds) |
Please note: All HNBR material supplied by Eastern Seals is peroxide cured.
Eastern Seals can supply a range of HNBR seal materials that have passed the NORSOK M-710 requirements. These are listed on our NORSOK Approved Compounds page. Please contact us for details.
To view technical material information on our HNBR seals range, please read our HNBR Materials page.