Seloc washers – Vibration-Resistant, Self-Sealing Washers
Seloc washers are self-sealing, vibration-resistant washers.
This shake-proof washer is designed to seal out air, water, lubricants and other liquid or gaseous contaminants.
Seloc washers resist the effect of tightening the bolt or nut that cause the metal serrations to pierce the rubber, or bite into the relative metal surface, and provide the necessary locking action. The rubber covering reduces the risk of corrosion that occurs with normal lock washers as it envelopes the scores in the protective treatment on the metal face. This gives effective protection against moisture and oxidation.
Seloc washers are designed for use with regular screws or bolts for sealing panels and cases having large clearance holes or slots, and can also be used to seal openings of protrusions. Upon tightening, a seal is formed under the head of the screw or bolt as well as around the periphery of the washer face.
• Resists vibration
• Suitable for pre-build assemblies
• Options for water, mineral and alkalis
• Used on painted, plated and stove enameled surfaces
• Temperature range -35°C to +110°C
Please note: This Material Data Sheet section is to be used as a professional guide only. Eastern Seals (UK) Ltd may source their products from a variety of Quality Approved Suppliers and the data shown should not be relied upon by any purchaser without verification of material source.
|N60/PVC-SELOC||BLACK||-35°C to 110°C||63||Seloc washers are designed for use with regular screws or bolts for sealing panels and cases having large clearance holes or slots, and can also be used to seal openings of protrusions.|